It was time to replace the pot used for the fishes.
Bought a fibreglass tank, the overhead filter compartment, tiles, ceramic glue, wood, plywood and nails. List of items are at bottom of this page.
The plan was to tile the 2 sides for a terracotta look. Here is how the work in progress looks like.
List of items used
Note: The wood and plywood was cut by the hardware shop based on the list as in the photo above.
Bought a fibreglass tank, the overhead filter compartment, tiles, ceramic glue, wood, plywood and nails. List of items are at bottom of this page.
The plan was to tile the 2 sides for a terracotta look. Here is how the work in progress looks like.
List of items used
- Fibreglass tank,
- overhead filter compartment,
- tiles (4 x 8 inches),
- ceramic glue,
- wood,
- plywood,
- paint,
- paint brush of 2 inches wide,
- paint thinner (not turpentine, and the brand is Seamaster - Protective coating 3300-3397)
- nails (looks like 1 inch),
- small hammer,
- pliers (to handle problem nails)
Note: The wood and plywood was cut by the hardware shop based on the list as in the photo above.