Every angle its pretty

Once the wooden frames were ready, the tiles were put in place on each of the 2 frame sections. Its a matter of arranging and preference. Since the tiles were smaller than the total area, there were little gaps but that can be filled another time.

It was time to replace the pot used for the fishes. Bought a fibreglass tank, the overhead filter compartment, tiles, ceramic glue, wood, plywood and nails. List of items are at bottom of this page. The plan was to tile the 2 sides for a terracotta look. Here is how the work in progress looks like. List of items used Fibreglass tank,  overhead filter compartment,  tiles (4 x 8 inches), ceramic glue, wood, plywood, paint, paint brush of 2 inches wide, paint thinner (not turpentine, and the brand is Seamaster - Protective coating 3300-3397) nails (looks like 1 inch), small hammer, pliers (to handle problem nails) Note: The wood and plywood was cut by the hardware shop based on the list as in the photo above.